Xcentric Ripper2018-08-06T14:37:58+00:00

XR10 Specifications

The Xcentric Ripper is an excavator attachment tool developed with the latest advances in excavation and demolition systems in mind. It meets the highest standards. It was patented by Xcentric Ripper international/Grado Cero Sistemas, S.LU., a trailblazer in the industry. Thanks to it’s uncomplicated mechanical design, which has no pricey components the maintenance cost are very low and down times are ignorable.

Made completely of wear-resistant steel, this attachment device is almost maintenance free, less noisy than any other excavation tool, can be used under water without loss of performance, and adapted to countless work sites. The Xcentric Ripper is ideal for tunnel construction, working on walls and ceilings, and for other jobs. Thanks
to it’s uncomplicated mechanical design, which has no pricey components,
the maintenance cost are very low and down times are ignorable.

The XR10 is suitable for demolition works, where noise is an issue. Also for excavation, trenching or recycling plants it can be a perfect solution.

Model XR10

Hydraulic excavator tons 7 – 10
Mass of ripper (incl. top  bracket) kg 930
Mass of ripper (less top bracket) kg 829
Hydraulic working pressure MPa 15 – 18
Hydraulic return pressure MPa 0.6
Hydraulic oil flow L/min 60
Case drain maximum pressure MPa 0.4
Frequency 1/min 1500
Dimensions L x W x H cm 180x45x90
Accumulator pressure MPa 0.6
Suitable for:

Model XR10

Suitable for:
KOMATSU PC78, PC88, PC118, PC120, PW95
HITACHI ZX70
KOBELCO SK75
NEW HOLLAND E110
SUMITOMO
CAT 308, 311
HYUNDAI R80
DOOSAN DX80
CASE WX90, WX125
DEERE 75D, 85D
HIDROMEK
LIEBHERR A309
VOLVO ECR88
LIUGONG CLG908
SANY SY75
JCB 8085, JS115
YANMAR VI075, SV100
KUBOTA K75US, K110-3, K120-3
IHI 80VX3
TAKEUCHI TB285, TB290
KATO HD308, HD512
*Matching table is just for your indication. Excavator details might change per model and country. To find the best match for your excavator, please contact your local dealer.

XR15 Specifications

The Xcentric Ripper is an excavator attachment tool developed with the latest advances in excavation and demolition systems in mind. It meets the highest standards. It was patented by Xcentric Ripper international/Grado Cero Sistemas, S.LU., a trailblazer in the industry. Trough it’s design an outstanding performace has been achieved, allowing more efficient work.

Made completely of wear-resistant steel, this attachment device is almost maintenance free, less noisy than any other excavation tool, can be used under water without loss of performance, and adapted to countless work sites. The Xcentric Ripper is ideal for tunnel construction, working on walls and ceilings, and for other jobs. Thanks to it’s uncomplicated mechanical design, which has no pricey components, the maintenance cost are very low and down times are ignorable.

The XR15 is perfect in excavation and demolition in urban areas. Also for trenching, recycling plants, works underwater or in mud.

Model XR15

Hydraulic excavator tons 11 – 16 p
Mass of ripper (incl. top  bracket) kg 1700
Mass of ripper (less top bracket) kg 1550
Hydraulic working pressure MPa 16 – 19
Hydraulic return pressure MPa 0.6
Hydraulic oil flow L/min 120
Case drain maximum pressure MPa 0.4
Frequency 1/min 1400
Dimensions L x W x H cm 220x66x130
Accumulator pressure MPa 0.5

Suitable for:

Model XR15

Suitable for:
KOMATSU PC128, PC130, PC138, PC160
HITACHI ZX120, ZX160
KOBELKO SK135
NEW HOLLAND
SUMITOMO
CAT 312, 313, 314, 316
HYUNDAI R140, R145, R160
DOOSAN DX140
CASE W125, WX130, WX145, WX165, CX165
DEERE 130G, 135G, 160G, 180G
HIDROMEK HMK140
LIEBHERR A311, A313, A314, A914, A916, R317
VOLVO EW160, EC140, EC160
LIUGONG CLG915
SANY SY135
JCB JS130, JS140, JS145, JS160
YANMAR
KUBOTA K135US
IHI
TAKEUCHI TB1140, TB1160W
KATO HD512, HD513
*Matching table is just for your indication. Excavator details might change per model and country. To find the best match for your excavator, please contact your local dealer.

XR20 Specifications

The Xcentric Ripper is an excavator attachment tool developed with the latest advances in excavation and demolition systems in mind. It meets the highest standards. It was patented by Xcentric Ripper international/Grado Cero Sistemas, S.LU., a trailblazer in the industry. Trough it’s design an outstanding performace has been achieved, allowing more efficient work.

Made completely of wear-resistant steel, this attachment device is almost maintenance free, less noisy than any other excavation tool, can be used under water without loss of performance, and adapted to countless work sites. The Xcentric Ripper is ideal for tunnel construction, working on walls and ceilings, and for other jobs. Thanks to it’s uncomplicated mechanical design, which has no pricey components, the maintenance cost are very low and down times are ignorable.

The XR20 turns your medium size excavator into a high performace machine. You will use it in excavation and demolition. Also for trenching, recycling and working in permafrost is applicable with very high performance.

Model XR20

Hydraulic excavator tons 18 – 24
Mass of ripper (incl. top  bracket) kg 2500
Mass of ripper (less top bracket) kg 2200
Hydraulic working pressure MPa 18 – 20
Hydraulic return pressure MPa 0.6
Hydraulic oil flow L/min 160
Case drain maximum pressure MPa 0.4
Frequency 1/min 1400
Dimensions L x W x H cm 240x78x175
Accumulator pressure MPa 0.5
Suitable for:

Model XR20

Suitable for:
KOMATSU PC160, PC180, PC200, PC210, PC220, PC228, PC230, PW160, PW210
HITACHI ZX160, ZX180
KOBELCO SK200
NEW HOLLAND E210
SUMITOMO SH225
CAT 316, 320, 322, 323
HYUNDAI R160, R180, R210, R235
DOOSAN DX180, DX190, DX210, DX225, DX235
CASE WX165, W185, WX210, CX165, CX180, CX210, CX235
DEERE 180G, 190D, 210D, 250G
HIDROMEK HMK200, HMK220
LIEBHERR A914, A916, R317, A900, R900, A904C, A918, A920, A914C, A924
VOLVO EC160, EW180, EW210, EW230, EC210, EC220, EC235
LIUGONG CLG920, CLG922, CLG923
SANY SY215, SY235
JCB JS180, JS190, JS200, JS210, JS220, JZ235, JZ240, JZ255
YANMAR
KUBOTA K225US, K200-3, K240-3
IHI
TAKEUCHI
KATO HD820, HD823
*Matching table is just for your indication. Excavator details might change per model and country. To find the best match for your excavator, please contact your local dealer.

XR30 Specifications

The Xcentric Ripper is an excavator attachment tool developed with the latest advances in excavation and demolition systems in mind. It meets the highest standards. It was patented by Xcentric Ripper international/Grado Cero Sistemas, S.LU., a trailblazer in the industry. Trough it’s design an outstanding performace has been achieved, allowing more efficient work.

Made completely of wear-resistant steel, this attachment device is almost maintenance free, less noisy than any other excavation tool, can be used under water without loss of performance, and adapted to countless work sites.  Thanks to it’s uncomplicated mechanical design, which has no pricey components, the maintenance cost are very low and down times are ignorable.

The XR30 is indispensable for excavation and demolition, low noise and high performance makes it a leader. The perfect tool for all types of applications.

Model XR30

Hydraulic excavator tons 24 – 30
Mass of ripper (incl. top  bracket) kg 3300
Mass of ripper (less top bracket) kg 2800
Hydraulic working pressure MPa 22 – 24
Hydraulic return pressure MPa 0.6
Hydraulic oil flow L/min 180
Case drain maximum pressure MPa 0.4
Frequency 1/min 1300
Dimensions L x W x H cm 280x85x160
Accumulator pressure MPa 0.5
Suitable for:

Model XR30

Suitable for:
KOMATSU PC230, PC240, PC270, PC300
HITACHI ZX240
KOBELCO SK250
NEW HOLLAND E270
SUMITOMO SH280
CAT 324, 328, 329
HYUNDAI R250, R260, R290, R300
DOOSAN DX255, DX300
CASE WX240, CX250, CX290, CX300
DEERE 290G, 350G
HIDROMEK HMK300
LIEBHERR R906, A924C PLUS, R924, R926
VOLVO EC240, EC250, EC290, EC300, EC305
LIUGONG CLG925
SANY
JCB JS240, JS260, JS330
YANMAR
KUBOTA
IHI
TAKEUCHI
KATO HD1023, HD1430
 *Matching table is just for your indication. Excavator details might change per model and country. To find the best match for your excavator, please contact your local dealer.

XR40 Specifications

The Xcentric Ripper is an excavator attachment tool developed with the latest advances in excavation and demolition systems in mind. It meets the highest standards. It was patented by Xcentric Ripper international/Grado Cero Sistemas, S.LU., a trailblazer in the industry. Trough it’s design an outstanding performace has been achieved, allowing more efficient work.

Made completely of wear-resistant steel, this attachment device is almost maintenance free, less noisy than any other excavation tool, can be used under water without loss of performance, and adapted to countless work sites. Thanks to it’s uncomplicated mechanical design, which has no pricey components, the maintenance cost are very low and down times are ignorable.

The XR40 becomes the protagonist of the work site. In quarrying work excellent results are achieved with production volumes up to 120 m3 per hour. In trenching is unrivaled.

Model XR40

Hydraulic excavator tons 32 – 40
Mass of ripper (incl. top  bracket) kg 4200
Mass of ripper (less top bracket) kg 3600
Hydraulic working pressure MPa 22 – 24
Hydraulic return pressure MPa 0.6
Hydraulic oil flow L/min 200
Case drain maximum pressure MPa 0.4
Frequency 1/min 1200
Dimensions L x W x H cm 310x90x184
Accumulator pressure MPa 0.5
Suitable for:

Model XR40

Suitable for:
KOMATSU PC340, PC350, PC360
HITACHI ZX330
KOBELCO SK350
NEW HOLLAND E400
SUMITOMO
CAT 330, 336
HYUNDAI R320, R330, R380
DOOSAN DX340, DX350, DX420
CASE CX350, CX370
DEERE 350G, 380G
HIDROMEK HMK370
LIEBHERR R936, R946
VOLVO EC330, EC340, EC360, EC380
LIUGONG CLG936
SANY SY365
JCB JS330, JS360
YANMAR
KUBOTA
IHI
TAKEUCHI
KATO HD2045
*Matching table is just for your indication. Excavator details might change per model and country. To find the best match for your excavator, please contact your local dealer.

XR50 Specifications

The Xcentric Ripper is an excavator attachment tool developed with the latest advances in excavation and demolition systems in mind. It meets the highest standards. It was patented by Xcentric Ripper international/Grado Cero Sistemas, S.LU., a trailblazer in the industry. Trough it’s design an outstanding performace has been achieved, allowing more efficient work.

Made completely of wear-resistant steel, this attachment device is almost maintenance free, less noisy than any other excavation tool, can be used under water without loss of performance, and adapted to countless work sites. Thanks to it’s uncomplicated mechanical design, which has no pricey components, the maintenance cost are very low and down times are ignorable.

The XR50 is specially designed for high-volume production in quarries and infrastructure works. Production volumes are reached over 150 m3 per hour in limestone and other types of fractured rock. Also for trenching and recycling.

Model XR50

Hydraulic excavator tons 42 – 55
Mass of ripper (incl. top  bracket) kg 5600
Mass of ripper (less top bracket) kg 5000
Hydraulic working pressure MPa 26 – 28
Hydraulic return pressure MPa 0.6
Hydraulic oil flow L/min 250
Case drain maximum pressure MPa 0.4
Frequency 1/min 1000
Dimensions L x W x H cm 320x90x190
Accumulator pressure MPa 0.5
Suitable for:

Model XR50

Suitable for:
KOMATSU PC400, PC450, PC500
HITACHI ZX470
KOBELCO SK520
NEW HOLLAND
SUMITOMO
CAT 345, 349, 350
HYUNDAI R480, R520
DOOSAN DX480, DX520
CASE CX470
DEERE 470G
HIDROMEK
LIEBHERR R946, R950, R954, R960
VOLVO EC460, EC480
LIUGONG CLG945
SANY SY465
JCB JS460
YANMAR
KUBOTA
IHI
TAKEUCHI
KATO HD2045
*Matching table is just for your indication. Excavator details might change per model and country. To find the best match for your excavator, please contact your local dealer.

XR60 Specifications

The Xcentric Ripper is an excavator attachment tool developed with the latest advances in excavation and demolition systems in mind. It meets the highest standards. It was patented by Xcentric Ripper international/Grado Cero Sistemas, S.LU., a trailblazer in the industry. Trough it’s design an outstanding performace has been achieved, allowing more efficient work.

Made completely of wear-resistant steel, this attachment device is almost maintenance free, less noisy than any other excavation tool, can be used under water without loss of performance, and adapted to countless work sites. Thanks to it’s uncomplicated mechanical design, which has no pricey components, the maintenance cost are very low and down times are ignorable.

The XR60 is designed for high-volume production in quarries and infrastructure works (> 175 m3/hr). Normally applied in areas, where drilling and blasting with explosives is not permitted for safety or environmental reasons. Also suitable for demolition, mining, etc.

Model XR60

Hydraulic excavator tons
Mass of ripper (incl. top  bracket) kg 7000
Mass of ripper (less top bracket) kg 5700
Hydraulic working pressure MPa 26 – 28
Hydraulic return pressure MPa 0.6
Hydraulic oil flow L/min 280
Case drain maximum pressure MPa 0.4
Frequency 1/min 1000
Dimensions L x W x H cm 345x110x127
Accumulator pressure MPa 0.25
Suitable for:

Model XR60

Suitable for:
KOMATSU PC600, PC650, PC700
HITACHI ZX650
KOBELCO SK670
NEW HOLLAND
SUMITOMO
CAT 364, 365
HYUNDAI R800
DOOSAN DX700
CASE CX700, DX800
DEERE 670G
HIDROMEK
LIEBHERR R960, R964C
VOLVO EC700
LIUGONG
SANY
JCB
YANMAR
KUBOTA
IHI
TAKEUCHI
KATO
*Matching table is just for your indication. Excavator details might change per model and country. To find the best match for your excavator, please contact your local dealer.

XR80 Specifications

The Xcentric Ripper is an excavator attachment tool developed with the latest advances in excavation and demolition systems in mind. It meets the highest standards. It was patented by Xcentric Ripper international/Grado Cero Sistemas, S.LU., a trailblazer in the industry. Trough it’s design an outstanding performace has been achieved, allowing more efficient work.

Made completely of wear-resistant steel, this attachment device is almost maintenance free, less noisy than any other excavation tool, can be used under water without loss of performance, and adapted to countless work sites. Thanks to it’s uncomplicated mechanical design, which has no pricey components, the maintenance cost are very low and down times are ignorable.

The XR80 meets or exceeds conventional equipment for high production in quarries and infrastructure projects, where drilling and blasting are no longer allowed or are simply more expensive. It can achieve production volumes of more than 200 m3 per hour in fractured rock types. Very suitable for marine excavation in large dredging projects.

Model XR80

Hydraulic excavator tons 70 – 100
Mass of ripper (incl. top  bracket) kg 10500
Mass of ripper (less top bracket) kg 8700
Hydraulic working pressure MPa 30 – 32
Hydraulic return pressure MPa 0.6
Hydraulic oil flow L/min 380
Case drain maximum pressure MPa 0.4
Frequency 1/min 1000
Dimensions L x W x H cm 380x132x230
Accumulator pressure MPa 0.25
Suitable for:

Model XR80

Suitable for:
KOMATSU PC800, PC850
HITACHI ZX870
KOBELCO
NEW HOLLAND
SUMITOMO
CAT 385, 390
HYUNDAI R800
DOOSAN
CASE
DEERE 870G
HIDROMEK
LIEBHERR R974
VOLVO EC700
LIUGONG
SANY
JCB
YANMAR
KUBOTA
IHI
TAKEUCHI
KATO
 *Matching table is just for your indication. Excavator details might change per model and country. To find the best match for your excavator, please contact your local dealer.

XR120 Specifications

The Xcentric Ripper is an excavator attachment tool developed with the latest advances in excavation and demolition systems in mind. It meets the highest standards. It was patented by Xcentric Ripper international/Grado Cero Sistemas, S.LU., a trailblazer in the industry. Trough it’s design an outstanding performace has been achieved, allowing more efficient work.

Made completely of wear-resistant steel, this attachment device is almost maintenance free, less noisy than any other excavation tool, can be used under water without loss of performance, and adapted to countless work sites. Thanks to it’s uncomplicated mechanical design, which has no pricey components, the maintenance cost are very low and down times are ignorable.

The XR120 is our biggest Series Production model. It is currently the largest serial attachment manufactured worldwide for quarrying. Production volumes up to 250 m3 per hour can be achieved. Ideal for mining, which brings great value and versatility to large tonnage excavators. Very appropriate for extracting marine works in dredging projects with adverse conditions.

Model XR120

Hydraulic excavator tons 100 – 150
Mass of ripper (less top bracket) kg 11000
Hydraulic working pressure MPa 22 – 24
Hydraulic return pressure MPa 0.6
Hydraulic oil flow L/min 600
Case drain maximum pressure MPa 0.4
Frequency 1/min 1000
Dimensions L x W x H cm 400x132x282
Accumulator pressure MPa 0.6
Suitable for:

Model XR120

Suitable for:
KOMATSU PC1250
HITACHI ZX1200
KOBELCO SK1400
NEW HOLLAND
SUMITOMO
CAT
HYUNDAI R1200
DOOSAN
CASE
DEERE
HIDROMEK
LIEBHERR R9100, R984
VOLVO
LIUGONG
SANY
JCB
YANMAR
KUBOTA
IHI
TAKEUCHI
KATO
*Matching table is just for your indication. Excavator details might change per model and country. To find the best match for your excavator, please contact your local dealer.

This Is A Custom Widget

This Sliding Bar can be switched on or off in theme options, and can take any widget you throw at it or even fill it with your custom HTML Code. Its perfect for grabbing the attention of your viewers. Choose between 1, 2, 3 or 4 columns, set the background color, widget divider color, activate transparency, a top border or fully disable it on desktop and mobile.

This Is A Custom Widget

This Sliding Bar can be switched on or off in theme options, and can take any widget you throw at it or even fill it with your custom HTML Code. Its perfect for grabbing the attention of your viewers. Choose between 1, 2, 3 or 4 columns, set the background color, widget divider color, activate transparency, a top border or fully disable it on desktop and mobile.